Glow in the Dark Powder:
Instructions for Use
Gel Candles:
The powder is an opaque pigment that does not actually dissolve in candle gel, but
rather is suspended. Mixing powder with candle gel (we recommend penreco MD or HD) creates
a white opaque looking material. You cannot see through it. One method that we have used
for this material is to pour a bottom layer of a powder/gel mix with a clear gel over
pour. We have had the most success with a bottom layer, which is about 1/5 to 1/8, the
depth of the candle.
The powder/gel mixture then provides bottom light, which glows through the clear gel. A
very clear gel does not pick up the light. Objects or bubbles suspended in the gel reflect
the light emitted by the Glow Powder and will be seen as suspended in midair. (So make
lots of bubbles when you pour clear over it!) The way the Glow Powder is used is up to the
artist's imagination! You can also make the entire candle with the glow powder/gel mix! It
is all up to you!
A starting point is to make a 5% stock. 5 parts of Glow Powder mixed with 95 parts of
melted gel. This is not a critical mix. Variations of this mix can be used depending on
the effects you want to achieve. Get the temperature of the gel in the 200-210 F range.
Fragrance Gel is done at much lower temperatures (140 F). Add the powder and mix well,
Make sure that all the material is dispersed well in the solution and none remains on the
bottom. Always mix well just before you pour. This stock solution can be reheated. Try to
keep the same container for your stock solution and reheat and add your new material to
it.
Glow Embeds:
Pour your gel/powder mix into a pan. Let cool, & using cookie cutters cut out
pieces, or pour gel into moulds. Stick the "glowing" gel pieces to the sides of
candle dish, then pour clear gel over. They will appear suspended within gel!!
Paraffin, Cream Crystalline, and other wax candles
Make or purchase a paraffin candle. Melt candle wax, and following usage amounts, add
glow powder. Make sure you mix well before dipping candles, because powder will settle.
Dip your candle in 2 or 3 times, drying between each dip. You only need to do this for the
last layers of wax to save on cost.
Hidden Pictures:
Paint a mural on your wall, then with the Clear Glow in the Dark paint you make, add in
hidden pictures that will only show when room is dark!
Plastics:
May be mixed with PE, PP, ABS, PVC ect... Can be extruded, cast, dipped, coated
injected and blown moulded. If you are considering using our pigments in a manufacturing
process for plastics, rubbers, resins, PVC etc. you will require our master batch pellets.
Tackle and Rods:
Glow powder is used in a wide range of applications like production of glow in the dark
clear coats for your lures. Simply add a small amount of glow pigment to your clear coat
or vinyl and stir. Another method is to use a strong adhesive and coat the lure, then
spray a clear topcoat to protect powder.Yes you can add it to POWDER PAINTS! Can withstand
temps up to 500 degree F. If you want to add it directly to silicon lures, just add it to
silicon when it is in the liquid state, then pour into moulds. Powder does tend to settle
so you may want to add a anti-settling agent. Test and add more pigment as required. The
more pigment added the brighter the glow. It can also be added to a rod wrapping epoxy.
Acrylic Nails:
Add a small amount of powder to your acrylic powder or gel system. Can be mixed ahead
of time and stored as well. Can also be added to clear top coat for a more temporary
effect. Use violet, green, blue or aqua and it will be invisible in the day and Glow
amazingly at night! (5gm will do 10-15 sets)
Dusting Techniques
>>
Pages :: 1 | 2 | 3 | 4
